Unnathi Groups Technology Reinvented

Coroguard EPI (Epoxy Paint)

100% solids, solvent free anti-corrosion epoxy coating for protecting steel structural subject to severe corrosive environment. The Coroguard EPI Epoxy coating provides a durable smooth finish having excellent weather proof resistance and also resistant to saline, moisture, water, acids & alkalis.

Coroguard EPI | Unnathi Suppliers | +91 9036132477| [email protected]
Technical Data
Maximum Operating Temperature, °C 107
Mixing Ratio By volume, (R : H) 4:1
Pot life at 30 °C , minutes 40
Full cure at 30 °C , hours 12
Coverage per coat, per ltr, Sq.mtr 6
No. of coats required 2
Film thickness per 2 coats, microns 125
Volume of solids, % 100

Applications areas

  • Pipeline
  • Tank
  • Gallery
  • Sluice gate
  • Platform
  • Duct
  • Swimming pool

Pack Size

  • 20 Ltr.

Surface Preparation :

Surface to be coated must be structurally sound, dry, free from loose material. All surface contamination must be removed. Grease and oil should be grit blasted or water jetted. Deeper penetration must be removed by mechanical means.

Mixing :

Contents of Resin and Hardener should be throughly stirred individually to disperse any settlement which may taken place during storage. The entire contents of Hardener should be poured into Resin and the materials thoroughly mixed for at least 3 minutes taking particular care to scrap the sides and bottom of the container. Mechanical mixing using a slow speed (300-400 rpm) electric drill fitted with mixing paddle is preferable. Follow mix ratio for part mixing.

Application :

Apply mixed materials with stiff nylon brush. The 1st coat must be firmly applied and be well scrubbed into the surface. The 1st coating should be allowed to become tack free, before applying the 2nd coat. No thinners or solvents should be added.