Similar Products

 
 

Pack Size:                
                    4 Ltr
                      20 Ltr

Epoxy based coating system having highest chemical resistance for protecting the surfaces under severe acidic and alkaline conditions for both interior and exterior applications and also resistant to saline, moisture, water, acids & alkalis.


 

Typical Properties

Maximum Operating Temperature, C : 121

Mixing Ratio By volume, (R : H) : 4 : 1

Pot life at 30 C , minutes : 20

Full cure at 30 C , hours : 4

Coverage per coat, per ltr, Sq.mtr : 4

No. of coats required   2
Film thickness per 2 coats, microns : 120

Applications

 Effluent treatment plant
 Battery room
 Chemical storage area
 Chemical processing area
 Laboratory
 Sewage treatment plant
   
Application Instructions :(Please read general instructions)

Surface Preparation : Surface to be coated must be structurally sound, dry, free from loose material. All surface contamination must be removed. Grease and oil should be grit blasted or water jetted. Deeper penetration must be removed by     mechanical means.

Mixing: Contents of Resin and Hardener should be thoroughly stirred individually to disperse any settlement which may taken place during storage. The entire contents of Hardener should be poured into Resin and the materials thoroughly mixed for at least 3 minutes taking particular care to scrap the sides and bottom of the container. Mechanical mixing using a slow speed (300-400 rpm) electric drill fitted with mixing paddle is preferable. Follow mix ratio for part mixing.

Application : Apply mixed materials with stiff nylon brush. The 1st coat must be firmly applied and be well scrubbed into the surface. The 1st coating should be allowed to become tack free, before applying the 2nd coat. No thinners or solvents should be added.
 

Epoxy Products : epoxy floor, epoxy resin, epoxy coating, epoxy paint, concrete epoxy, epoxy grout, epoxy glue, epoxy systems, epoxy injection, epoxy repair, epoxy putty, epoxy finish, fiberglass epoxy, epoxy metal, epoxy products, tar epoxy, epoxy lined, epoxy supplier, epoxy properties, plastic epoxy, epoxy material, conductive epoxy, liquid epoxy, epoxy compound, epoxy manufacturers, epoxy enamel, epoxy tubes, epoxy sealant, fast epoxy, granite epoxy, epoxy top, basement epoxy, epoxy mortar, industrial epoxy, epoxy polymer, epoxy contractors, epoxy waterproofing, epoxy bonding, epoxy mixer, epoxy lining, epoxy india, countertop epoxy, thermal epoxy, epoxy fill, epoxy application, epoxy price, epoxy pool, epoxy shower, boat epoxy, epoxy floor covering, epoxy cement, ceramic epoxy, epoxy surface

 

#3, 1st Cross, Netaji Circle, Mathikere Ext. Bangalore - 560054,    Email: unnathigroups@gmail.com, unnathisuppliers@gmail.com

Phone: 080 - 2276 8062            Mobile : +91 78488 14163

Copyright Unnathi Groups, All Rights Reserved